Features of the ALLMATIC AKMY2 Remote Control

The ALLMATIC AKMY2 26.995MHz remote control is a transmitter designed for the comfortable management of motorized and automated gates and garage doors. This casing can easily be programmed using mini-switches.

This model of ALLMATIC remote control features 2 green buttons and has a compact and elegant design. It operates with 12V batteries on a frequency of 26.995 MHz.

The casing of this remote control is black and has a rectangular shape. Thus, it has dimensions of 80 x 39 x 17 mm (Height x Width x Thickness).

This remote control is an essential accessory for controlling your motors and automation systems.

You can complete your order with peace of mind by benefiting from a one-year warranty offered by Alloremotecontrol to its customers on all its products. Even better, an opportunity to add a second year of additional warranty is offered at the time of finalizing your order (see T&Cs).

WARNING:

Risk of confusion between the references AEMX AKMY 26.995 MHz and 30.875 MHz, ALLMATIC and EUROPE AUTOMATISME. Open your remote control to check the frequency indicated on the quartz.

The ALLMATIC AKMY2 Remote Control is a Wise Choice

There are as many high-quality gate remotes as there are mediocre quality remotes on the market. If you do not want to risk falling for the latter (mediocre quality), then the ALLMATIC AKMY2 remote control is made for you.

A Remote Control Perfectly Combining Simplicity and Practicality

A single glance at this model of gate remote control will be enough to see that it has a very simple appearance. There will be no unnecessary details. By only implementing 2 control buttons, the manufacturers of this device aimed to enhance readability. And they have succeeded.

It must be admitted that having too many buttons on such a device could disorient a large number of users. Here, you won’t even have to glance at the device to know which control button to press.

Moreover, 2 buttons will be more than sufficient for the task assigned to the gate remote control.

In addition, a compact design and ultra-lightweight enhance not only the grip but also facilitate the storage and transport of this device. Thus, you can always keep this device within reach and use it when needed.

A Reliable Remote Control with a Long Lifespan

If you are looking for a remote control that has no bugs or malfunctions, then you have already found it. The ALLMATIC AKMY2 remote control has undergone numerous testing phases. The result is that it poses no risk of failure.

This device has become an essential part of the daily lives of many people. This implies that it will be subjected to repeated use and will not always be shielded from potential shocks, as well as wear and tear.

The ALLMATIC AKMY2 remote control has been designed with these various parameters in mind. It features high-quality electronic components and manufacturing materials. Therefore, it is unlikely to get damaged easily.

Programming the ALLMATIC AKMY2 Remote Control

In principle, gate remotes require programming, configuration, or setup before they can be used. This procedure allows the device to be linked to the receiver of the motorized and automated gate or garage door. The programming method may vary from one model or brand of remote control to another.

For the ALLMATIC AKMY2 remote control, this programming is done by manipulating mini-switches or dip switches located within its casing. The procedures to follow are very simple.

1. First, you need to have a functional mini-switch remote control already paired with the receiver of your gate or garage door.
2. You will need to open the casing of this functional remote control and analyze the position of each mini-switch inside.
3. Next, you will open your new ALLMATIC remote control and adjust the position of each mini-switch to match that of the mini-switches from the already functional remote control.
4. Once that’s done, you just need to test your new remote control. If it works correctly, you can finally close the casing.

Note that if you do not have a functional remote control, you can simply open the casing of the receiver of your motorized and automated equipment. This receiver should also have mini-switches. You just need to replicate their position on the new remote control to be programmed.