Presentation of the V2 PHOX-4 C.769

Attention: If you are replacing a V2 brand remote control, check that “CONTR. 769” is written on the back of your remote. Feel free to contact us if your contract code is not one of those presented on the site.

The V2 PHOX-4 remote control (with contract code C.769) will allow you to control your gate or garage motorization as you wish. This four-button model, the V2 PHOX-4 C.769, will soon become essential for you. Indeed, with it, you can operate an opening or closing command for your motorization with just this single device. Coded with a radio frequency of 433.92 MHz, this remote gives you, with this number, an optimal signal range. Powered by a 12 V alkaline 23A battery, this transmitter will provide you with great reliability despite daily use.

Transportable at your convenience

With a simple appearance, the dimensions of this remote, 55 mm in height, 13 mm in thickness, and 32 mm in width, are minimal. Thanks to this data, you can easily store the V2 PHOX-4 C.769. In a pocket, in a handbag, or even in a storage space in your car to keep it close, you won’t be bothered by its size. Moreover, the appearance of the V2 PHOX-4 C.769 will not clash with your environment. Coated in black, this remote is also accompanied by buttons marked with a small white circle. Ideal for knowing which buttons to press to trigger your motorization and thus limit handling errors.

Compatibility of the V2 PHOX-4 C.769

This remote control is compatible with the following transmitter:

• The device V2 PHOENIX C.769

Note, this remote control is not compatible with the following models, despite their identical appearances. Indeed, their contract code is different:

• The remote control V2 PHOX “CONTR.47 “
• The model V2 PHOX “CONTR.50”
• The transmitter V2 PHOX “CONTR.17”
• The device V2 PHOX “CONTR.002”
• The remote control V2 PHOX “CONTR.126”

Programming the V2 PHOX-4 C.769

For more information, you can consult the programming manual for this remote by clicking here.

To program your remote control on a receiver, you must:

1. First, open the housing of your receiver. It is located near your motorization.
2. Next, on the receiver board, press the programming button SW1. The receiver diode L1 lights up.
3. Then, within 5 seconds, press the button on your new remote control. Hold it down. The receiver diode blinks once.
4. Next, release the button. Wait 10 seconds.
5. Congratulations! Your new remote control is programmed.

FAQ for the V2 PHOX-4 C.769

Can you tell me more about V2 Remote Controls?

V2 Remote Controls is an Italian company that, since 1985, designs and develops integrated systems for home automation, ensuring comfort and security on a daily basis. V2 remote controls are studied and developed by a homogeneous group of enthusiastic and motivated people, putting their skills and experience at the service of their clients’ needs.

Where can I find other products from the V2 Remote Controls brand?

You can find other products from the V2 Remote Controls brand on the Alloremotecontrol website by clicking on the link here

Why buy this product on Alloremotecontrol?

• First, know that your satisfaction is our priority. We will handle your product with great care.
• Next, your order will be shipped the same day.
• Then a 1-year warranty is offered (extension possible up to 2 years – see T&Cs)
• Finally, telephone support (08 99 25 30 57) or by email ([email protected]) available 5 days a week