Presentation of the CAME TOPD4 RYS

With its CAME TOPD4 RYS, the CAME brand offers you one of its latest releases fresh out of their HQ in Italy!

The choice of versatility

With the CAME TOPD4 RYS, you can control four channels of your choice. Whether it’s your gate or your garage motorization, you have the option of 4 commands to control your device. Additionally, this remote control features a dual frequency, at 433 MHz and 868 MHz. This system helps you avoid making a mistake by choosing another remote, as this transmitter can operate on both frequencies! A time saver for you! Moreover, this remote is very easy to program. Indeed, it has a self-learning coding, which means that this transmitter can be registered directly in the receiver. Just a few minutes after receiving this product, you can start using it.

Safety, the key word for CAME

There is no doubt about the work done by the Italian manufacturer CAME for your safety. To illustrate this, the multiple designers of the brand have included a rolling code, also known as a rotating code, in this CAME TOPD4 RYS. With this type of code, your security is superior to a standard transmitter. How does it work? Well, the code sent to your receiver – from this transmitter – varies with each new pulse. This follows an algorithm recorded in the transmitter during its programming. This means that for your receiver to activate and execute the command of your choice, the rotating code transmitted by the transmitter must be the one with the algorithm it has in memory.

Compatibility of the CAME TOPD4 RYS remote control

The CAME TOPD4 RYS is compatible with CAME TOPD models with the letter R following. This means that this remote control operates on rolling code. Among the transmitters compatible with this remote control, here is a non-exhaustive list:

• The transmitter CAME TOPD2 RGS
• The remote control CAME TOPD2 RES
• The CAME TOPD4 RBS
• The remote CAME TOPD4 RPS
• The transmitter CAME TOPD4 RKS

Attention: This transmitter is not compatible with TOPD transmitters with the letter F following, as these are fixed code remote controls.

Programming the CAME TOPD4 RYS remote control

How to program your remote using an old remote (in four steps):

1. Take your old and new remote. Get close to your receiver (within a maximum distance of 5 m)
2. Press the already programmed button on your old remote for 10 seconds. Its LED should become steady.
3. You then have 20 seconds to register the button of your choice on your new remote by holding it down. You can register multiple remotes at once.
4. Congratulations! Your new remote is programmed!

For more information on programming your remote, we invite you to consult the product PDF manual on our site by clicking here

To change the frequency of your remote:

Hold down the two largest buttons.
The LED of the transmitter will first blink slowly.
After about 5 seconds, it will blink more quickly.
Then after another 5 seconds, it will turn off, or blink slowly again, or stay steadily on.
You can release the buttons.

If the LED has turned off, then the transmitter buttons are now at 868MHz.
If it has started blinking slowly, then the transmitter buttons are in dual frequency 433.92 and 868.35 MHz.
Finally, if the LED has turned on steadily, then the transmitter buttons are now at 433.92 MHz.

FAQ for the CAME TOPD4 RYS

Where can I buy other products from the CAME brand?

You can buy other products from the CAME brand by clicking on the link here.

Why buy your product on Alloremotecontrol?

– First, know that your satisfaction is our priority. We will handle your product with great care.

– Then, your order is shipped the same day.

– Next, a 1-year warranty is offered (extension possible up to 2 years – see T&Cs).

– Phone assistance (08 99 25 30 57) or email support is available 5 days a week.

– If the customer notices a defect in the product, they have 15 days from the date of purchase to return it to Alloremotecontrol.