Presentation of the Came TOPD2RBS Remote Control

The Came TOPD2RBS remote control is designed to control your automation systems and your gate and garage door motors. This unit is programmable via self-learning.

It offers a good grip and has 2 light gray buttons. It operates with a CR2032 battery on a dual frequency of 433.92MHz and 868.35MHz. It is a durable 2-channel transmitter that will allow you to control 2 different automation systems.

The Came TOPD2RBS is known for its impressive lifespan, but also for its ease of programming. The R at the end of its reference indicates that this remote control works with rolling code.

You can also find a 4-channel version by clicking here: Came TOPD4RBS Remote Control.

Compatibility of the Came TOPD2RBS Remote Control

The Came TOPD2RBS is compatible and can replace the following remote controls (non-exhaustive list):

• The CAME TOPD2RKS model
• The CAME TOPD2RES transmitter
• The CAME TOPD2RPS device
• The CAME TOPD4RBS remote control
• The CAME TOPD4RKS fob
• The CAME TOPD4RES
• The CAME TOPD4RPS model

Note:

• Manufacturer reference: 806TS-0111
• The Came TOPD2RBS remote control is not compatible with fixed code models.
• Dimensions: 70mm x 34mm x 13mm (h x W x D)
• Range: 150m outdoors, 50m indoors
• Operating temperature: -20°C to +55°C

Programming the Came TOPD2RBS Remote Control

Program your remote control to your receiver (in 4 steps):

1. Take both remote controls and get close to your receiver (max 5m)
2. Press and hold the already programmed button on your old remote for 10 seconds until the LED is steady
3. You have 20 seconds to register the button of your choice on your new remote. You can register multiple remotes at once.
4. And there you go, your new remote is programmed!

For more information on programming this remote, please consult the product manual on Alloremotecontrol by clicking here.

To change the frequency of your remote:

Hold both buttons down.
The LED of the transmitter will first blink slowly.
After about 5 seconds, it will blink faster.
Then after another 5 seconds, it will turn off, or blink slowly again, or stay steadily on.
You can release the buttons.

If the LED has turned off, then the transmitter buttons are now at 868MHz.
If it has started blinking slowly, then the transmitter buttons are in dual frequency 433.92 and 868.35 MHz.
Finally, if the LED is steadily on, then the transmitter buttons are now at 433.92 MHz.

Frequently Asked Questions about the Came TOPD2RBS Remote Control

How to change the batteries of your new remote control?

If you notice that your Came transmitter is starting to weaken and the LED stays steady when you press a button, it is time to change the battery. To do this, use a flat object like a screwdriver and gently lift the cover to open the remote. Once you have access to the battery, remove it and place the new one in respecting the indicated polarity. You can now purchase replacement batteries by clicking on this link: CR2032 Duracell Batteries

How to program your remote control if you live in a condominium?

If you live in a condominium, you may not be able to program your remote control. Indeed, the condominium may reserve the right to block the registration of remote controls. To be sure, contact your condominium management.

How to differentiate fixed code models from rolling code models?

You can differentiate them by the color of the buttons; fixed code models have dark gray buttons, while rolling code models have light gray or white buttons.

Why buy the Came TOPD2RBS remote control on Alloremotecontrol?

• Free shipping for the purchase of 2 remote controls or more
• Shipping of your order on the same day
• Free test batteries
• 1-year warranty included (extension possible up to 2 years – see T&Cs)
• Phone support (08 99 25 30 57) or email ([email protected]) available 5 days a week